New Hampshire Code of Administrative Rules
Pda - Pease Development Authority
Chapter Pda 500 - MOORINGS AND ANCHORAGES
Part Pda 510 - MOORING EQUIPMENT
Section Pda 510.01 - Mooring Buoys and Floats

Universal Citation: NH Admin Rules Pda 510.01

Current through Register No. 13, March 27, 2025

(a) Mooring buoys shall be polystyrene foam blocks or acrylonitrile butadiene styrene (ABS) type plastic buoys. All other types of buoys shall be prohibited.

(b) All mooring buoys and floats shall be:

(1) Blue and white; or

(2) Orange.

(c) A mooring buoy shall be installed at the permit holder's sole expense within 30 days of the issuance of the mooring permit, if the permit is granted between April 1 and September 30, or, if the permit is granted between October 1 and March 31, on or before May 1.

(d) If the permit holder fails to install the mooring buoy within the designated time period, then:

(1) After notice and an opportunity for a hearing in accordance with Pda 507.03, the division shall revoke the mooring permit;

(2) The permit holder's authorization to use the mooring shall lapse; and

(3) The mooring shall be reassigned to the next person in order of priority on the wait list for the applicable mooring field, mooring subfield, or nearshore area.

#7940, eff 8-23-03; amd by #8775, eff 12-16-06; ss by #9975, eff 8-20-11 (See Revision Note at chapter heading for Pda 500)

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.