New Hampshire Code of Administrative Rules
Lab - Commissioner, Department of Labor
Chapter Lab 1400 - SAFETY AND HEALTH OF EMPLOYEES
Part Lab 1403 - RULES FOR EMPLOYEE SAFETY AND HEALTH
Section Lab 1403.68 - Welding in Confined Spaces

Universal Citation: NH Admin Rules Lab 1403.68

Current through Register No. 40, October 3, 2024

The employer shall ensure compliance with the following requirements:

(a) In addition to the requirements in Lab 1403.14, all welding and cutting operations carried on in confined spaces shall be ventilated to prevent the accumulation of toxic substances or possible oxygen deficiency;

(b) In such operations where it is impossible to provide such ventilation, air supplied respirators or hose masks, which are labeled to indicate they are approved by Mine Safety and Health Administration MSHA for this purpose, shall be used;

(c) In areas immediately hazardous to life, hose masks with blowers or self-contained breathing equipment shall be used. The breathing equipment shall be labeled to indicate it is approved by MSHA;

(d) Where welding operations are carried on in confined spaces and where welders and helpers are provided with hose masks, hose masks with blowers or self-contained breathing equipment, a worker shall be stationed on the outside of such confined spaces to ensure the safety of those working within; and

(e) Oxygen shall never be used for ventilation.

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.