New Hampshire Code of Administrative Rules
Lab - Commissioner, Department of Labor
Chapter Lab 1400 - SAFETY AND HEALTH OF EMPLOYEES
Part Lab 1403 - RULES FOR EMPLOYEE SAFETY AND HEALTH
Section Lab 1403.46 - Powder-Actuated Tools
Universal Citation: NH Admin Rules Lab 1403.46
Current through Register No. 40, October 3, 2024
The employer shall ensure compliance with the following requirements:
(a) Only employees trained by the employer or equipment manufacturer shall be allowed to operate powder-actuated tools;
(b) All powder-actuated tools shall be tested by the employee before each use and all defects discovered before or during use shall be corrected; and
(c) Tools shall not be loaded until immediately before use. A loaded tool shall not be left unattended.
#4118 eff 8-22-86, EXPIRED: 8-22-92
New. #6684, eff 2-4-98, EXPIRED: 2-4-06
New. #8606, INTERIM, eff 4-12-06, EXPIRED: 10-09-06 (formerly Lab 1403.60)
New. #8796, eff 1-11-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
