New Hampshire Code of Administrative Rules
Lab - Commissioner, Department of Labor
Chapter Lab 1400 - SAFETY AND HEALTH OF EMPLOYEES
Part Lab 1403 - RULES FOR EMPLOYEE SAFETY AND HEALTH
Section Lab 1403.35 - Lockout The employer shall ensure compliance with the following requirements

Universal Citation: NH Admin Rules Lab 1403.35

Current through Register No. 12, March 21, 2024

(a) All stored energy hazards including but not limited to the following shall be released, locked-out, or otherwise rendered non-hazardous prior to commencement of any work which could subject the employee to potential injury:

(1) Hydraulic pressure;

(2) Pneumatic pressure;

(3) Steam pressure;

(4) Vacuum;

(5) Electricity;

(6) Mechanical; and

(7) Gravity.

(b) Padlocks shall be made available to employees for the purpose of locking-out equipment when required.

(c) Only the individual who is working on the equipment shall be allowed to remove the lockout device.

(d) Lockout devices shall indicate the identity of the employee applying the device(s).

#4118 eff 8-22-86, EXPIRED: 8-22-92

New. #6684, eff 2-4-98, EXPIRED: 2-4-06

New. #8606, INTERIM, eff 4-12-06, EXPIRED: 10-09-06 (formerly Lab 1403.48 )

New. #8796, eff 1-11-07

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.