New Hampshire Code of Administrative Rules
Lab - Commissioner, Department of Labor
Chapter Lab 1400 - SAFETY AND HEALTH OF EMPLOYEES
Part Lab 1403 - RULES FOR EMPLOYEE SAFETY AND HEALTH
Section Lab 1403.31 - Jointers

Universal Citation: NH Admin Rules Lab 1403.31

Current through Register No. 40, October 3, 2024

The employer shall ensure compliance with the following requirements:

(a) Each hand-fed jointer with a horizontal cutting head shall have an automatic guard which shall cover the section of the head on the working side of the fence or cage, and a guard which shall cover the back of the cage or fence; and

(b) A jointer guard shall automatically adjust itself to cover the unused portion of the head, and shall remain in contact with the material at all times.

#4118 eff 8-22-86, EXPIRED: 8-22-92

New. #6684, eff 2-4-98, EXPIRED: 2-4-06

New. #8606, INTERIM, eff 4-12-06, EXPIRED: 10-09-06 (formerly Lab 1403.42)

New. #8796, eff 1-11-07

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.