New Hampshire Code of Administrative Rules
Lab - Commissioner, Department of Labor
Chapter Lab 1400 - SAFETY AND HEALTH OF EMPLOYEES
Part Lab 1403 - RULES FOR EMPLOYEE SAFETY AND HEALTH
Section Lab 1403.25 - Forklift Trucks and Powered Industrial Trucks

Universal Citation: NH Admin Rules Lab 1403.25

Current through Register No. 12, March 21, 2024

The employer shall ensure compliance with the following requirements:

(a) If at any time a powered industrial truck is in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition;

(b) Forklift trucks with extended lifts shall be equipped with an overhead guard unless operating conditions do not permit;

(c) Fork trucks shall be equipped with a vertical load backrest extension when the type of load presents a hazard to the operator;

(d) The brakes of highway trucks and trailers shall be set and wheel chocks placed under the rear wheels to prevent the truck from rolling while fork trucks are entering or leaving; and

(e) Employers shall verify that the above equipment shall be operated by competent individuals as defined in Lab 1402.01.

#4118 eff 8-22-86, EXPIRED: 8-22-92

New. #6684, eff 2-4-98, EXPIRED: 2-4-06

New. #8606, INTERIM, eff 4-12-06, EXPIRED: 10-09-06 (formerly Lab 1403.35 )

New. #8796, eff 1-11-07

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.