New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Wt - Wetlands Programs
Chapter Env-Wt 500 - PROJECT-SPECIFIC REQUIREMENTS
Part Env-Wt 513 - DOCKING STRUCTURES AND ACCESSORY DOCKING STRUCTURES
Section Env-Wt 513.16 - Additional Design Standards and Application Requirements for Marinas
Universal Citation: NH Admin Rules Env-Wt 513.16
Current through Register No. 13, March 27, 2025
(a) In addition to meeting all other applicable requirements, a marina shall be designed to:
(1) Minimize its visual impact on abutters
and users of the surface water;
(2)
Contain any leakage or spills of fuels, lubricants, waste products, or other
pollutants from all marina operations;
(3) Not represent a hazard to
navigation;
(4) Have designated
areas for washing or other cleaning of watercraft;
(5) Control and treat storm water;
and
(6) Include at least one
pump-out facility for the removal of wastes from on-board receptacles that
receive and retain wastes from toilets, sinks, showers, and other on-board
sources of sewage or graywater.
(b) On the plans submitted with the application, the applicant shall show:
(1) The
location and specifications of any abrasive blasting, painting, or hull sanding
operations;
(2) The locations and
specifications of (a)(4) through (6), above; and
(3) The location and method for disposing of
used oil and other waste products.
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
