New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Wt - Wetlands Programs
Chapter Env-Wt 500 - PROJECT-SPECIFIC REQUIREMENTS
Part Env-Wt 512 - BREAKWATERS
Section Env-Wt 512.07 - Breakwater Maintenance and Repair Project Classification
Universal Citation: NH Admin Rules Env-Wt 512.07
Current through Register No. 13, March 27, 2025
(a) A breakwater may be maintained or repaired without obtaining a permit only if all of the following conditions are met:
(1) The
breakwater was originally constructed prior to permit jurisdiction or was
installed pursuant to a permit and in compliance with all permit terms and
conditions;
(2) The work consists
only of placing materials that have been dislodged from the breakwater back
into their original location; and
(3) All work is done without the use of
machinery.
(b) Breakwater maintenance and repair shall be a minimum impact project only if both of the following conditions are met:
(1) The
breakwater was originally constructed prior to permit jurisdiction or was
installed pursuant to a permit and in compliance with all permit terms and
conditions; and
(2) The work
consists of replacement of original materials that have been dislodged from the
breakwater into their original location using machinery that will be operated
from a barge or from a land area outside of any jurisdictional areas.
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
