New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Wt - Wetlands Programs
Chapter Env-Wt 500 - PROJECT-SPECIFIC REQUIREMENTS
Part Env-Wt 512 - BREAKWATERS
Section Env-Wt 512.03 - Application Requirements for Breakwaters

Universal Citation: NH Admin Rules Env-Wt 512.03

Current through Register No. 13, March 27, 2025

(a) The project-specific information required by Env-Wt 311.03(b)(11) for a breakwater application shall be as specified in (b) and (c), below.

(b) The following information shall be shown on the plan required by Env-Wt 311.03(b)(4):

(1) Dimensions of the structure, including dimensions at the toe of slope;

(2) The dimensions visible at normal high water level;

(3) The direction of prevailing wave activity;

(4) A line representing the 50-foot distance from the shoreline within which a breakwater may be constructed pursuant to Env-Wt 512.04(e)(1);

(5) All docking structures on the subject property or otherwise associated with the subject property; and

(6) The construction sequence that will be followed.

(c) The applicant also shall provide:

(1) Cross-sections showing the height and slope of the structure and the normal high water line; and

(2) A complete list of all construction materials.

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.