New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Ws - Division of Water
Chapter Env-Ws 300 - NEW HAMPSHIRE DRINKING WATER RULES
Part Env-Ws 379 - SITE SELECTION OF LARGE PRODUCTION WELLS FOR COMMUNITY WATER SYSTEMS
Section Env-Ws 379.19 - Contamination Control Program

Universal Citation: NH Admin Rules Env-Ws 379.19

Current through Register No. 13, March 27, 2025

(a) The applicant shall establish a contamination control program which minimizes the risk of contamination from known sources of contamination.

(b) The program shall include provisions and a schedule for remediation and/or monitoring of residual contamination from all known contamination sources in the wellhead protection area to ensure that contamination will not reach the well. A known contamination source in compliance with the conditions of a groundwater management permit issued in accordance with Env-Wm 1403 shall constitute an adequate control program.

(c) A description of the contamination control program and supporting evaluations and documentation shall be provided in the final report.

(See Revision Note at chapter heading for Env-Ws 300) #6521, eff 6-4-97; ss by #6979, eff 4-21-99; ss by #8871, INTERIM, eff 4-21-07, EXPIRES: 10-18-07

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.