New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Ws - Division of Water
Chapter Env-Ws 300 - NEW HAMPSHIRE DRINKING WATER RULES
Part Env-Ws 301 - PURPOSE AND APPLICABILITY
Section Env-Ws 301.03 - Exemption to Rule Requirement Pursuant to Part 1, Article 28-a for Water Systems Owned by Political Subdivisions
Current through Register No. 13, March 27, 2025
(a) A rule contained in Table 301-1 in (b) below, shall not apply to a political subdivision pursuant to Part 1, Article 28-a of the N.H. Constitution, if:
(b) The rules in Env-Ws 300 which were not effective prior to November 28, 1984 and are additional to any federal mandate pursuant to RSA 541-A:26 shall include the following rules in Table 301-1:
Table 301-1
Post-1984 Requirements that are Additional to Federal Mandates
Rule | Description |
Env-Ws 307.01 | Standards of the American Water Works Association as described by Env-Ws 301.03(d). |
Env-Ws 312.01(d) | Radon sampling |
Env-Ws 314 .01(b) and Env-Ws 316.01(b) | Fluoride MCL and SMCLS in Table 314-1 and Table 316-1(b) for only NTNC systems as identified in Table 314 -1(e) |
Env-Ws 315.03(d) | MCLGs for disinfectant residual level goals in Table 315-4 |
Env-Ws 316.01(b) | Monitoring for secondary contaminants |
Env-Ws 360.13 | Inspection frequency of public water systems |
Env-Ws 361.03 | 5 Year source pump test |
Env-Ws 361.04 | Distribution system flushing |
Env-Ws 361.05 | Operating distribution valves |
Env-Ws 361.08 | Inspection and maintenance of storage tanks |
Env-Ws 370 .01 | General design standards as described in Env-Ws 301.03(c) |
Env-Ws 370.02 | Design review fee |
Env-Ws 370.03 | Quality of product and workmanship as described in Env-Ws 301.03(d) |
Env-Ws 372.07 | Design review fee for small community water systems |
Env-Ws 372.16 | Water supply quality |
Env-Ws 372.17(f) | Extra tank for fire storage |
Env-Ws 372.22(b) | Alarm silencer and labels |
Env-Ws 372.22(e) | Pressure gauge |
Env-Ws 372.22(f) | Immediate disinfection |
Env-Ws 372.22(g) | Off / on / alarm for pump controls |
Env-Ws 372.22(i) | Oiless air compressor |
Env-Ws 372.23(g) | Air tube for electronic drawdown probe |
Env-Ws 372.24(d)(2) | Passive cathodic protection system |
Env-Ws 372.24(e) | Capped filler pipe |
Env-Ws 372.25(b) | Wiring and control devices |
Env-Ws 372.32(l) | Tracer tape above pipe |
Env-Ws 372.32(m) | "Gate" on valve box |
Env-Ws 373.06 | Design review fee |
Env-Ws 373.14 | Water supply quality |
Env-Ws 373.15 | Extra tank for fire storage |
Env-Ws 373.17(b) | Pressure gauge |
Env-Ws 373.17(c) | Off / on / alarm for pump controls |
Env-Ws 373.17(d) | Oiless air compressor |
Env-Ws 373.25 | "Gate" on valve box |
Env-Ws 374.09 | Quality of products and workmanship as described in Env-Ws 301.03(d) |
(c) Relative to the Recommended Standards for Water Works, 2003 edition as incorporated by reference in Env-Ws 370.01 and Env-Ws 374.01, only the changes since the 1982 edition shall be subject to the exemption in Env-Ws 301.03(a).
(d) Relative to the standards of the American Water Works Association (AWWA) as incorporated by reference in Env-Ws 307.01, only the changes since 1984 shall be subject to the exemption in Env-Ws 301.03(a).
(See Revision Note at chapter heading for Env-Ws 300) #6521, eff 6-4-97; ss by #8360, INTERIM, eff 6-4-05, EXPIRES: 12-1-05; ss and moved by #8498, eff 11-30-05 (from Env-Ws 301.04)