New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-Wq - Water Quality and Quantity Programs
Chapter Env-Wq 1000 - SUBDIVISIONS; INDIVIDUAL SEWAGE DISPOSAL SYSTEMS
Part Env-Wq 1003 - APPLICATIONS FOR SUBDIVISION OR ISDS APPROVAL
Section Env-Wq 1003.21 - Designation of Well Location
Universal Citation: NH Admin Rules Env-Wq 1003.21
Current through Register No. 13, March 27, 2025
(a) Pursuant to RSA 485-A:30-b, all plans and specifications for ISDS shall show one of the following:
(1) The
actual or proposed location of the well and the protective radius associated
with the well; or
(2) A designated
area for the well, within which the well can be installed anywhere without the
protective well radius extending beyond the property line and without violating
any other set-back requirements.
(b) In the event the well cannot be installed in the location or area designated pursuant to (a), above, then the procedures and requirements of Env-Wq 1008.10(c) and RSA 485-A:30-b, I(g) shall be followed, and the standard release form as per Env-Wq 1008.12 shall be executed.
(See Revision Note at chapter heading for Env-Wq 1000) #9086, eff 2-9-08
The amended version of this section by New Hampshire Register Volume 36, Number 41, eff.10/1/2016 is not yet available.
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
