New Hampshire Code of Administrative Rules
Env - Department of Environmental Services
Subtitle Env-A - Air Related Programs (formerly designated as rules of Division of Air Resources.)
Chapter Env-A 1200 - VOLATILE ORGANIC COMPOUNDS (VOCs) REASONABLY AVAILABLE CONTROL TECHNOLOGY (RACT)
Part Env-A 1215 - ROTOGRAVURE AND FLEXOGRAPHIC PRINTING
Section Env-A 1215.03 - Equipment Standards for Rotogravure and Flexographic Printing

Universal Citation: NH Admin Rules Env-A 1215.03

Current through Register No. 13, March 27, 2025

In lieu of the requirements in Env-A 1215.02, the owner or operator of such processes shall install and operate one of the following:

(a) A carbon adsorption system which reduces the rate of VOC emissions delivered from the capture system to the control equipment by at least 90% by weight over the adsorption cycle or 24 hours, whichever is less; or

(b) Incineration control equipment which reduces the rate of VOC emissions delivered from the capture system to the incineration inlet by at least 90% by weight.

(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.