New Hampshire Code of Administrative Rules
Eng - Board of Professional Engineers
Chapter Eng 400 - CONTINUED STATUS
Part Eng 403 - CONTINUING PROFESSIONAL DEVELOPMENT
Section Eng 403.01 - Renewal Requirements

Universal Citation: NH Admin Rules Eng 403.01

Current through Register No. 40, October 3, 2024

(a) A renewal application shall not be accepted for filing unless the licensee indicates on the renewal application, and under penalty of unsworn falsification, that he/she has completed the minimum required hours of approved professional development hours required by 403.01(b) and lists the specific basis for each credit.

(b) Each licensee shall obtain at least 30 professional development hours of approved continuing education courses during the biennial renewal period as a condition of license renewal.

(c) If a licensee exceeds the requirement, a maximum of 15 professional development hours may be carried forward into the subsequent renewal period.

#6911, eff 12-15-98); ss by #8190, eff 10-19-04; ss by #10045, eff 1-1-12

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.