Current through Register No. 40, October 3, 2024
(a) Each applicant for a
corporation/partnership, master, journeyman or high/medium voltage electrician
license, apprentice or high/medium voltage trainee identification card, or
third party electrical inspector shall make application on forms supplied by
the board.
(b) Application forms
may be obtained from the electricians' board at the address listed in Elec
103.05(b) or electronically at
http://www.oplc.nh.gov/electricians/forms.htm.
(c) Completed application forms shall be
mailed to the electricians' board or submitted in person to the address listed
in Elec 103.05(b).
(d) Each
corporation or partnership applicant shall furnish the following on the
prescribed form:
(1) Name, address, telephone
number and e-mail address of the corporation or partnership;
(2) Corporation type, whether electrical or
high medium voltage;
(3)
Information pertaining to the person directly in charge of the electrical
business affairs of the corporation or partnership, including:
a. Name, address, telephone number and
title;
b. Duties;
c. License number of master or high/medium
voltage electrician; and
d. Status
as full-time or part-time and average hours per week;
(4) Signature of the president or director of
the corporation or the other partner in the partnership under the penalty of
unsworn falsification and date signed;
(5) Signature of the master or high/medium
voltage electrician directly in charge of the electrical business affairs of
the corporation or partnership under the penalty of unsworn falsification and
date signed; and
(6) Certificate of
good standing from the NH secretary of state's office for the corporation or
partnership.
(e) Each
master or journeyman applicant shall furnish the following on the prescribed
form:
(1) Name, address and telephone
number;
(2) E-mail address;
(3) Date of birth;
(4) Information pertaining to the electrical
employers used for verification of on-the-job training in (9) below, including:
a. Name(s) and address(es);
b. Dates of employment; and
c. Nature of employer's business;
(5) A description of the duties as
an employee pertaining to the electrical installations and date employment
started;
(6) Names and addresses of
3 references of persons unrelated to the applicant who have knowledge of the
applicant's professional character;
(7) Whether the applicant has any felony
criminal convictions that have not been annulled by the court and if so:
a. Date of conviction;
b. Nature of the offense;
c. The penalty imposed by the court,
including any terms of probation; and
d. Any continuing court
requirements;
(8) Whether
the applicant's electrician license has been suspended, revoked or sanctioned
in any jurisdiction and if so:
a. Name and
location of the particular administrative licensing agency;
b. An explanation of the
circumstances;
c. Date of
administrative licensing agency's action or loss of electrician license;
and
d. Reason for the
administrative licensing agency's action, including whether it was a result of
settlement;
(9) Show a
minimum total of 8000 hours of on-the-job training for journeyman and an
additional 2000 hours for master with a certification for each place of
employment in the electrical trade, including:
a. Dates of employment;
b. Type of work performed; and
c. Signature of a licensed
electrician;
(10) High
school and higher education, including:
a.
Name and location of school;
b.
Date of high school graduation;
c.
Courses and certificates obtained;
d. Major and degree awarded, if applicable;
and
e. Dates
attended;
(11) Photograph
of the applicant taken no more than 6 months prior to the date of the
application;
(12) The applicant's
social security number required pursuant to
RSA 161-B:11,
VI-a; and
(13) Applicant's signature under the penalty
of unsworn falsification and date signed.
(f) Each high/medium voltage electrician
applicant shall furnish the following on the prescribed form:
(1) Name, address and telephone
number;
(2) Date of
birth;
(3) E-mail address;
(4) Information pertaining to the
high/medium voltage employers used for verification of on- the-job training,
including:
a. Name(s) and
address(es);
b. Dates of
employment; and
c. Nature of
employment;
(5) A
description of the duties as an employee pertaining to the electrical
installations and date employment started;
(6) Names and addresses of 3 references of
persons unrelated to the applicant, who have knowledge of the applicant's
professional character;
(7) Whether
the applicant has any felony criminal convictions that have not been annulled
by the court and if so:
a. Date of
conviction;
b. Nature of the
offense;
c. The penalty imposed by
the court, including any terms of probation; and
d. Any continuing court
requirements;
(8) Whether
the applicant's electrician license has been suspended, revoked or sanctioned
in any jurisdiction and if so:
a. Name and
location of the particular administrative licensing agency;
b. An explanation of the
circumstances;
c. Date of
administrative licensing agency's action or loss of electrician license;
and
d. Reason for the
administrative licensing agency's action, including whether it was a result of
settlement;
(9) High
school and higher education, including:
a.
Name and location of school;
b.
Date of high school graduation;
c.
Courses and certificates obtained;
d. Major and degree awarded, if applicable;
and
e. Dates
attended;
(10) Photograph
of the applicant taken no more than 6 months prior to the date of the
application;
(11) Certification
showing proof of:
a. Completion of a state,
federal or employer certification program approved by the board pursuant to
Elec 306; and
b. Signature of
licensed master or high medium voltage electrician;
(12) The applicant's social security number
required pursuant to
RSA 161-B:11,
VI-a; and
(13) Applicant's signature under the penalty
of unsworn falsification and date signed.
(g) Each apprentice applicant shall furnish
the following on the prescribed form:
(1)
Name, address and telephone number;
(2) Date of birth;
(3) E-mail address;
(4) Name and address of current employer,
nature of employer's business, and date employment started;
(5) Name and address of most recent former
electrical employer;
(6) Names and
addresses of 3 references of persons unrelated to the applicant who have
knowledge of the applicant's professional character;
(7) Whether the applicant has any felony
criminal convictions that have not been annulled by the court and if so:
a. Date of conviction;
b. Nature of the offense;
c. The penalty imposed by the court,
including any terms of probation; and
d. Any continuing court
requirements;
(8) Whether
the applicant's right of apprenticeship has been suspended, revoked or
sanctioned in any jurisdiction and if so:
a.
Name and location of the particular administrative agency;
b. An explanation of the
circumstances;
c. Date of
administrative agency's action; and
d. Reason for the administrative agency's
action, including whether it was a result of settlement;
(9) High school and higher education,
including:
a. Name and location of
school;
b. Date of high school
graduation;
c. Courses and
certificates obtained;
d. Major and
degree awarded, if applicable; and
e. Dates attended;
(10) Photograph of the applicant taken no
more than 6 months prior to the date of the application;
(11) If the applicant has been licensed as an
electrician in another state, the name of that state;
(12) Signature of supervising master
electrician and his/her master electrician's license number;
(13) The applicant's social security number
required pursuant to
RSA 161-B:11,
VI-a; and
(14) Applicant's signature under the penalty
of unsworn falsification and date signed.
(h) Each high/medium voltage trainee
applicant shall furnish the following on the prescribed form:
(1) Name, address and telephone
number;
(2) Date of
birth;
(3) E-mail
address;
(4) Name and address of
current employer, nature of employer's business, and date employment
started;
(5) Name and address of
most recent former employer;
(6)
Names and addresses of 3 references of persons unrelated to the applicant who
have knowledge of the applicant's professional character;
(7) Whether the applicant has any felony
criminal convictions that have not been annulled by the court and if so:
a. Date of conviction;
b. Nature of the offense;
c. The penalty imposed by the court,
including any terms of probation; and
d. Any continuing court
requirements;
(8) Whether
the applicant's right to train as a high/medium voltage electrician has been
suspended, revoked or sanctioned in any jurisdiction and if so:
a. Name and location of the particular
administrative agency;
b. An
explanation of the circumstances;
c. Date of administrative agency's action or
loss of electrician license; and
d.
Reason for the administrative agency's action, including whether it was a
result of settlement;
(9)
High school and higher education, including:
a. Name and location of school;
b. Date of high school graduation;
c. Courses and certificates
obtained;
d. Major and degree
awarded, if applicable; and
e.
Dates attended;
(10)
Photograph of the applicant taken no more than 6 months prior to the date of
the application;
(11) If the
applicant has been licensed as a high/medium voltage electrician in another
state, the name of that state;
(12)
Signature of supervising high/medium voltage or master electrician and his/her
high/medium voltage or master electrician's license number;
(13) The applicant's social security number
required pursuant to
RSA 161-B:11,
VI-a; and
(14) Applicant's signature under the penalty
of unsworn falsification and date signed.
(i) Each third party electrical inspector
applicant shall furnish the following on the prescribed form:
(1) Name, address, and telephone
number;
(2) Date of
birth;
(3) Email address;
(4) Name and address of current employer,
nature of employer's business, and date(s) of employment;
(5) Whether the applicant has any felony
criminal convictions that have not been annulled by the court and if so:
a. Date of conviction;
b. Nature of the offense;
c. The penalty imposed by the court,
including any terms of probation; and
d. Any continuing court
requirements;
(6) If
currently licensed as an electrician in New Hampshire or any other
jurisdiction, the license type, date of issuance, license number, and state of
licensure;
(7) If currently
licensed in New Hampshire as a professional electrical engineer, the license
number;
(8) An indication of which
level of third party electrical inspector they are applying for; and
(9) If applying for approval as a third party
electrical inspector as a professional electrical engineer:
a. For level 1 third party electrical
inspector applications, documentation sufficient to demonstrate knowledge of
residential electrical design; or
b. For level 2 third party electrical
inspector applications, documentation sufficient to show knowledge of
commercial and industrial electrical design for 5 years.
(10) If applying for approval as a third
party electrical inspector as a New Hampshire building official:
a. For level 1 third party electrical
inspector applications, having performed electrical inspections as a New
Hampshire building official for a minimum of 3 years; or
b. For level 2 third party electrical
inspector applications, having performed commercial and industrial electrical
inspections as a New Hampshire building official for a minimum of 5
years.
(11) The
applicant's social security number required pursuant to
RSA 161-B:11,
VI-a; and
(12) Applicant's signature under the penalty
of unsworn falsification and date signed.
(j) Pursuant to
RSA
319-C:6-b, a fee of $50.00 shall be submitted
along with each initial application set forth in this section. Once an
application is accepted by the board, no refund shall be granted. Apprentice
electricians pursuant to Elec 304.02, high/medium voltage trainees pursuant to
Elec 304.04, and third party electrical inspectors pursuant to Elec 304.05
shall not be charged an application fee.
(k) Applications about which there has been
no communication from the applicant to the board for one year shall be
destroyed.
#10356, INTERIM, eff 6-6-13, EXPIRES: 12-3-13 (See
Revision Note #1 and Revision Note #2 at chapter heading for Elec 300); ss by
#10420, eff 9-25-13