New Hampshire Code of Administrative Rules
Agr - Commissioner, Department of Agriculture, Markets, and Food
Chapter Agr 1400 - WEIGHTS AND MEASURES
Part Agr 1404 - REGISTRATION OF SERVICE TECHNICIANS
Section Agr 1404.09 - Renewal of Certificates of Registration as a Service Technician

Universal Citation: NH Admin Rules Agr 1404.09

Current through Register No. 40, October 3, 2024

(a) Service technicians intending to renew such a certificate shall submit proof in the form of calibration certificates from accredited laboratories showing all testing equipment, except for the equipment described in (g) below has been certified.

(b) All paperwork required for a renewal for a certificate of registration as a service technician shall be submitted no later than 30 days prior to the expiration of the certificate being renewed. This shall include the completed and signed renewal form and all calibration certifications for any and all equipment to be used by the technician seeking renewal.

(c) Service technicians applying for renewal of their certificates of registration shall:

(1) Submit payment of the renewal fee to the division;

(2) Follow the general application procedures in (d) below; and

(3) Comply with the requirements in (e) and (f) below if those requirements are applicable.

(d) The general application procedures shall require that applicants for renewal of a certificate of registration:

(1) Review the "Renewal Application for Service Technician License" as it is provided by the division;

(2) Correct any preprinted information which is incorrect; and

(3) Complete and submit the form to the division after signing and dating the same statement(s) they were required to sign on the application form for the initial certificate of registration.

(e) Every 6 years applicants seeking renewal of certificates of registration to work with devices in categories A, B or H listed in Agr 1404.02(d)(1), (d) (2), and (d)(8), respectively, shall:

(1) Pass the written service technician examination administered by the division; or

(2) Attend and successfully complete a division-sponsored seminar offered as an alternative to the examination.

(f) Applicants required by (e) above to pass the written service technician examination or successfully complete a division-sponsored seminar shall:

(1) Comply with the examination application procedures in Agr 1404.06; and

(2) Submit payment of the $20 examination fee to the division.

(g) The only testing equipment that is not required to be re-examined and re-calibrated annually by an accredited laboratory shall be LPG and vehicle tank meter provers, 50 gallons or larger. Such provers shall be calibrated at least every 5 years.

(See Revision Note at chapter heading for Agr 1400) #7462, eff 3-21-01; ss by #9416, INTERIM, eff 3-13-09, EXPIRED: 9-9-09

New. #9639, eff 1-20-10

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.