Nevada Administrative Code
Chapter 624 - Contractors
CLASSIFICATIONS
Section 624.340 - Classification C-17: Lathing and plastering; subclassifications
Universal Citation: NV Admin Code 624.340
Current through September 16, 2024
1. The Board will grant to qualified applicants a license in the specialty of lathing and plastering. The Board designates such a license as a "classification C-17" license. A person who holds a classification C-17 license may perform any of the work authorized for the subclassifications of the classification C-17 license.
2. The subclassifications of the classification C-17 license and the work authorized for persons licensed in the respective subclassifications are:
(a) LATHING
(subclassification C-17a): The selection and application of wood and metal lath
and any other material or product manufactured to provide key or suction bases
for the support of plaster coatings, including channel iron for the support of
fireproof lath and solid plaster partitions, but does not include any
plastering or erecting of a wall, ceiling or soffit to which the bases are
applied.
(b) PLASTERING
(subclassification C-17b): The coating of surfaces with a plaster, made of a
mixture of such materials as sand, cement, quicklime, hydrated lime and water,
and the installation of lath or other base for the plaster.
(c) DRYWALL (subclassification C-17c): The
installation and coating of gypsum wallboard and sheathing, including the
installation of a system of suspended ceilings made of gypsum
wallboard.
(d) ACOUSTICAL TILE
(subclassification C-17d): The installation of wood, mineral, fiber and other
types of acoustical tile by the use of adhesives or other acceptable means,
including the preparation of the surface for the installation.
(e) COATINGS OF STUCCO AND CEMENT
(subclassification C-17e): The application to surfaces, whether by manual or
mechanical means, of coatings made of stucco and cement, including the
preparation of the surfaces and the provision of a base, including fireproof
lath, for the coatings, and the fireproofing of structural members.
(f) STUDS OF SHEET METAL (subclassification
C-17f): The erection and installation of studs made of sheet metal for the
framing of ceilings and nonstructural partitioning walls.
Added to NAC by Contractors' Bd., eff. 8-26-83; A 1-22-86
NRS 624.100, 624.220
Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
