Current through September 16, 2024
1. The Board will grant to qualified
applicants a license in the specialty of painting and decorating. The Board
designates such a license as a "classification C-4" license. A person who holds
a classification C-4 license may:
(a) Apply
any type of paint, varnish, shellac, stain, protective coatings and
wax;
(b) Attach papers, fabrics and
plastics to the surfaces of buildings and their appurtenances;
(c) Examine and prepare surfaces for painting
and wallcovering; and
(d) Install
drywall, metal studs and acoustical tile.
2. The subclassifications of the
classification C-4 license and the work authorized for persons licensed in the
respective subclassifications are:
(a)
PAINTING (subclassification C-4a): The application of all paints, varnishes,
protective coatings, shellacs, stains and other pigment by brush, spray or
roller, including the installation and application of polyurethane or similar
products.
(b) WALLCOVERING
(subclassification C-4b): The preparation of surfaces and the application to
those surfaces of papers, fabrics, plastic foils and such other materials as
are generally accepted by contractors as wallcovering materials.
(c) TAPING AND FINISHING (subclassification
C-4c): The taping and finishing of the surfaces of wallboard and sheathing to
create a permanent surface.
(d)
SANDBLASTING (subclassification C-4d): The sandblasting of surfaces by use of
equipment which is designed to clean, grind, cut or decorate surfaces with a
blast of sand or other abrasive propelled by steam or compressed air.
(e) DRYWALL (subclassification C-4e): The
installation and coating of gypsum wallboard and sheathing, including the
installation of a system of suspended ceilings made of gypsum
wallboard.
(f) SHEET METAL STUDS
(subclassification C-4f): The erection and installation of studs made of sheet
metal for the framing of ceilings and for nonstructural partitioning, but not
the installation of wood or structural steel for framing.
(g) ACOUSTICAL TILE (subclassification C-4g):
The installation of wood, mineral, fiber and other types of acoustical tile by
the use of adhesives or other acceptable materials and the preparation of the
surface for the installation.
Added to NAC by
Contractors' Bd., eff. 8-26-83; Added to NAC by Contractors' Bd., eff. 8-26-83;
A by
R095-12,
6/23/2014
NRS
624.100,
624.220
REVISER'S NOTE.
The regulation of the State Contractors' Board filed with
the Secretary of State on June 23, 2014 (LCB File No. R095-12), which amended
this section, contains the following provision not included in NAC:
"Sec. 11. On June 23, 2014:
1. A person who holds a subclassification C-4h license
issued pursuant to the provisions of former paragraph (h) of subsection 2 of
NAC 624.220, as amended by section 3 of this regulation, shall be deemed to
hold a subclassification C-4a license issued pursuant to the provisions of
paragraph (a) of subsection 2 of NAC 624.220, as amended by section 3 of this
regulation.
* * *"
