Nevada Administrative Code
Chapter 623 - Architecture, Interior Design and Residential Design
GENERAL REQUIREMENTS
Section 623.760 - Seal for residential designer
Universal Citation: NV Admin Code 623.760
Current through December 12, 2024
1. Each residential designer shall obtain and possess an embossed seal, a seal designed as a rubber stamp or a seal in electronic format that complies with the following specifications:
(a) The diameter of the seal must be approximately 1 7/8 inches.
(b) The seal must contain the name of the registrant, his or her number of registration and conform to the following design:
2. Each plan, specification, report or other document issued by a registrant must be signed and must be sealed or stamped by the registrant either manually or electronically.
Bd. of Architecture, § 17, eff. 5-7-80-NAC A 11-21-88; A by Bd. of Architecture, Interior Design & Residential Design by R120-01, 3-4-2002; R012-06, 5-4-2006; R076-13, 2-26-2014
NRS 623.140, 623.185
Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
