1. To obtain a permit for the construction or
alteration of an explosives manufacturing plant, a person must submit an
application form to the Enforcement Section and make the following information
available for review by the Administrator or a representative of the
Administrator:
(a) A copy of the safety plan
and procedures for the explosives manufacturing plant;
(b) A copy of the written safety program for
the explosives manufacturing plant;
(c) A copy of the program for process safety
management of highly hazardous chemicals;
(d) A map of a 1-mile radius surrounding the
area of the explosives manufacturing plant, which identifies all:
(1) Inhabited buildings;
(2) Roadways;
(3) Railways; and
(4) Other buildings and areas where there may
be people, including, without limitation, ranching operations;
(e) A plot plan of the explosives
manufacturing plant that includes:
(1) A
general layout of the explosives manufacturing plant;
(2) The location of each explosives
manufacturing building within the explosives manufacturing plant with a
description of:
(I) The types of explosives
present in the building;
(II) The
maximum quantity of each identified type of explosive; and
(III) The maximum number of employees who are
present during the manufacturing operations;
(3) The location of each magazine in the
explosives manufacturing plant;
(4)
The location of all buildings, other than explosives manufacturing buildings,
within the explosives manufacturing plant and a description of the uses of each
such building; and
(5) The location
and dimensions of all barricades within the explosives manufacturing
plant;
(f) A copy of the
building plans for each explosives manufacturing building within the explosives
manufacturing plant, which include:
(1)
Details and diagrams describing the materials used to construct the floors,
walls, ceilings and roofs of each building, including the location and setup of
revetment and blast walls;
(2)
Electrical installations and fixtures, and diagrams describing locations, type
and code designations of those installations and fixtures;
(3) Diagrams of the plumbing, including water
supply, drains and grey water;
(4)
Plans and diagrams of the ventilation of each building, including heating,
ventilation and air-conditioning systems and local exhaust systems;
(5) Fire suppression systems, if
installed;
(6) Lightning protection
systems, if installed;
(7) Steam
plant and steam distribution systems, if installed; and
(8) Detailed diagrams of the electrostatic
discharge system, if installed; and
(g) A copy of the building plans for all
buildings, other than explosives manufacturing buildings.
2. If the Enforcement Section receives
incomplete or inaccurate documentation in an application package for a
construction permit, the Enforcement Section shall notify the applicant for the
permit in writing and inform him or her of the deficiencies. An applicant must
correct the deficiencies within 30 days after being notified of the
deficiencies.
Added to NAC by Div. of Industrial
Relations by R109-00, eff. 9-6-2001