Nevada Administrative Code
Chapter 522 - Oil and Gas
PRODUCTION PRACTICES
Section 522.310 - Equipment for measurement
Universal Citation: NV Admin Code 522.310
Current through September 16, 2024
1. Adequate facilities must be provided for efficient measurement of the gas and oil produced for the purpose of obtaining gas to oil ratios on each well and reporting oil, gas and water production.
2. Wellhead equipment must be installed and maintained in good working condition so that static bottom hole pressures of flowing wells may be obtained at any time.
3. Valves must be installed on both casing and tubing so that surface pressures can be readily measured at any time.
Div. of Mineral Res., § 400, eff. 12-20-79
Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
