Nevada Administrative Code
Chapter 484D - Equipment and Size, Weight and Load of Vehicles
EQUIPMENT OF VEHICLES
Standards for Pneumatic Tires
Section 484D.210 - Faults requiring removal of tire; tread-depth measurements
Universal Citation: NV Admin Code 484D.210
Current through September 16, 2024
1. The outside diameters of tires used on dual wheels must be such that each tire will contact the level roadway at all times. A tire must be removed from service if it has:
(a) Any portion of the ply or cord structure
exposed;
(b) Any bump, bulge or
knot related to ply or tread separation or partial failure of the tire
structure;
(c) A ply or cord break;
or
(d) A cut which extends more
than 1 inch in any direction on the outside of the tire and is deep enough to
reach the body cords.
2. For the purposes of NAC 484D.190 to 484D.215, inclusive, tread-depth measurements must not be made where tiebars, wearbars, humps or fillets are located.
[Dep't of Motor Veh., Pneumatic Tires Reg. §§ V & VI, eff. 10-4-73] - (Substituted in revision for NAC 484.220)
NRS 484D.505, 484D.560
Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
