Nevada Administrative Code
Chapter 445A - Water Controls
UNDERGROUND INJECTION CONTROL
Construction, Operation, Monitoring and Abandonment
Section 445A.913 - Frequency of monitoring

Universal Citation: NV Admin Code 445A.913

Current through September 16, 2024

The pressure of injection, pressure of the annular space between the tubing and the casing, rate of flow and cumulative volume of injected fluid must be monitored at least:

1. Once each week for the disposal operations of a Class II well.

2. Twice each month for Class III wells.

3. Once each month for enhanced recovery of a Class II well.

4. Once each day for injection of liquid hydrocarbons and the injection for withdrawal of stored hydrocarbons for a Class II well.

5. As required by the permit for the operation of a Class V well.

Added to NAC by Environmental Comm'n, eff. 7-22-87; A 10-21-87-Substituted in revision for NAC 445.4272

NRS 445A.425, 445A.465, 445A.660

Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.