Nevada Administrative Code
Chapter 445A - Water Controls
PUBLIC WATER SYSTEMS
Design, Construction, Operation and Maintenance
Section 445A.67045 - Pumping facilities: Controls

Universal Citation: NV Admin Code 445A.67045

Current through September 16, 2024

1. The flow and pressure of a public water system must be controlled by the appropriate use of piping, valves and automatic control.

2. Pumps and their prime movers and appurtenances must be controlled in such a manner that they will operate at their rated capacity without sustained overload. There must be a means to prevent a motor from energizing if a backspin cycle occurs.

3. Electrical controls must be located above grade.

4. There must be a means of protection against low voltages and the failure of phase. Surge arrestors must be provided for protection from power surges.

Added to NAC by Bd. of Health, eff. 2-20-97

NRS 445A.860

Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.