Nevada Administrative Code
Chapter 445A - Water Controls
PUBLIC WATER SYSTEMS
Bottled Water
Section 445A.574 - Piping and draining

Universal Citation: NV Admin Code 445A.574

Current through September 16, 2024

1. The piping for the water which is used in the operation of the plant must not be directly connected with any supply of nonpotable water. The piping for any nonpotable water must be adequately and durably identified as such by, for example, the use of distinctive yellow paint. The piping which carries nonpotable water must not be connected to equipment in the bottling and processing areas or have an outlet in those areas.

2. The piping which carries potable water must be installed in such a manner as to preclude the possibility of back siphonage.

3. A pipe for the disposal of sewage must not be installed over:

(a) The areas in which the water is processed or stored; and

(b) The areas in which the equipment and containers are cleaned,

unless there is a nonpermeable ceiling which separates the pipe and those areas.

4. There may be no direct connection between the sewerage and any drains originating from equipment in which portable equipment or utensils are placed.

5. Drain lines from equipment must not be permitted to discharge wastewater in a manner that will flood or flow across a floor of the plant.

Added to NAC by Bd. of Health, eff. 10-14-82; A 9-15-94

NRS 439.200

Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.