Nevada Administrative Code
Chapter 445A - Water Controls
MINING FACILITIES
Operation and Design of Facilities
Section 445A.425 - Process components in existence on September 1, 1989: Standards; additional monitoring

Universal Citation: NV Admin Code 445A.425

Current through September 16, 2024

1. A process component in existence on September 1, 1989, is not required to meet more stringent engineering containment standards during the design life of that component if the applicant can demonstrate that:

(a) The process component meets and will continue to meet its design criteria; and

(b) There have been no significant changes in the characteristics of the material to be contained by the process component which would increase the potential to degrade the waters of the State.

2. Upon issuing a permit for a process component in existence on September 1, 1989, the Department may require additional monitoring of the site to verify that the conditions of this section are being met. A process component found to have had releases of process fluid as a result of this monitoring must comply with the requirements of NAC 445A.441.

Added to NAC by Environmental Comm'n, eff. 9-1-89-Substituted in revision for NAC 445.24344

NRS 445A.425, 445A.465

Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.