Nevada Administrative Code
Chapter 444 - Sanitation
PUBLIC BATHING PLACES
General Standards for Construction
Section 444.170 - Filters

Universal Citation: NV Admin Code 444.170

Current through September 16, 2024

1. Any filter used in a pool must be designated by the NSF International as complying with all applicable requirements of Standard 50, "Circulation System Components and Related Materials for Swimming Pools, Spas/Hot Tubs," of the NSF International or in the absence of applicable requirements, be approved by the health authority. A copy of this standard may be obtained from the NSF International, P.O. Box 130140, Ann Arbor, Michigan 48113, at a cost of $45. Flow rates for filters must not exceed those listed by the NSF International Standard.

2. The filter plant must be provided with influent pressure gauge.

3. The filter plant must be provided with a means for draining all filter units and piping, so that all parts of the system may be drained to prevent damage from freezing where so required.

Bd. of Health, Public Bathing Places Reg. Art. 27, eff. 5-21-74-NAC A 7-23-82; 11-1-88; 1-16-96

NRS 439.200, 444.070

Disclaimer: These regulations may not be the most recent version. Nevada may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.