Nebraska Administrative Code
Topic - MOTOR VEHICLES, DEPARTMENT OF
Title 250 - NEBRASKA ADMINISTRATIVE CODE
Chapter 1 - RULES AND REGULATIONS OF THE DEPARTMENT OF MOTOR VEHICLES REGARDING THE APPROVAL AND INSTALLATION OF IGNITION INTERLOCK DEVICES AND ADMINISTRATION OF THE IGNITION INTERLOCK PERMIT PROGRAM
Section 250-1-007 - INSTALLATION, CALIBRATION, AND REMOVAL
Current through September 17, 2024
007.01 An ignition interlock device, required by an administrative license revocation, probation order, sentence, or Board order, shall be a device approved by the Department and installed by the provider in conformance with the directions of the manufacturer. A device must be installed by an installer at the provider's physical location or by a provider's mobile installation service.
007.02 Instruction.
The provider shall instruct the driver in the operation of the ignition interlock device, safe operation of a motor vehicle while the ignition interlock device is installed, and compliance with required procedures, including but not limited to responding to a signal from the device to report to the provider for service. These procedures shall include a minimum 15-minute waiting period between the last drink of an alcoholic beverage and time of blowing into the ignition interlock device. The driver shall be instructed that he or she must contact the provider to have the interlock data logger downloaded within five days of receipt of a message for service. The driver shall be instructed that failure to arrange and complete such download or service within five days will result in a lockout requiring towing of the motor vehicle.
007.03 Required Calibration.
The ignition interlock device shall signal a need for calibration to the set point (.03 BrAC) at 30 days. If the calibration is not checked by the provider prior to the 36th day, on the 36th day the ignition interlock device shall prevent the motor vehicle from being started. The ignition interlock device may be calibrated using either a wet alcohol standard or a compressed gas standard. The ignition interlock may be calibrated by the provider using a mailing service. The calibration record shall be maintained by the provider and a copy shall be given to the driver. The calibration record shall include:
007.04 Removal of Ignition Interlock Device.
007.05 Repealed
007.06 Repealed
007.07 Repealed
007.08 Repealed