Nebraska Administrative Code
Topic - LABOR, DEPARTMENT OF
Title 229 - DEPARTMENT OF LABOR
Chapter 2 - MINIMUM CONSTRUCTION STANDARDS FOR BOILERS AND PRESSURE VESSELS
Section 229-2-010

Universal Citation: 229 NE Admin Rules and Regs ch 2 ยง 010

Current through March 20, 2024

The following codes have been adopted:

A. The following sections of the 2015 Edition of the ASME Boiler and Pressure Vessel Code and any edition or addenda published by ASME on or before July 1, 2015:

(1) ASME Section I, Rules for Construction of Power Boilers;

(2) ASME Section II Part A, Ferrous material Specifications;

(3) ASME Section II Part B, Nonferrous Material Specifications;

(4) ASME Section II Part C, Specifications for Welding Rods, Electrodes, and Filler Metals;

(5) ASME Section II Part D, Properties;

(3) ASME Section IV Rules for Construction of Heating Boilers;

(4) ASME Section V Nondestructive Examination;

(5) ASME Section VI, Recommended Guidelines for the Care and Operation of Heating Boilers;

(6) ASME Section VII, Recommended Guidelines for the Care of Power Boilers;

(7) ASME Section VIII Division 1, Rules for the Construction of Pressure Vessels;

(8) ASME Section VIII Division 2, Alternative Rules for the Construction of Pressure Vessels;

(9) ASME Section VIII Division 3, Alternative Rules for the Construction of High Pressure Vessels;

(10) ASME Section IX, Welding and Brazing Qualifications;

(11) ASME Section X, Fiber-Reinforced Plastic Pressure Vessels; and

(12) ASME Section XII, Rules for Construction and Continued Service of Transport Tanks.

B. ASME CSD-1, Controls and Safety Devices for Automatically Fired Boilers, 2012 Edition and any edition or addenda published by ASME on or before July 1, 2012.

C. ASME B 31.1, Power Piping, 2014 Edition and any edition or addenda published by ASME on or before July 1, 2014, or as referenced in Appendix A-360 of ASME Section I, Power Boilers.

D. ASME B 31.3, Process Piping, 2012 Edition and any edition or addenda published by ASME on or before July 1, 2012.

E. ASME B 31.4, Pipeline Transportation Systems for Liquids and Slurries, 2012 Edition and any edition or addenda published by ASME on or before July 1, 2012.

F. ASME B 31.5, Refrigeration Piping and Heat Transfer Components, 2010 Edition and any edition or addenda published by ASME on or before July 1, 2010.

G. ASME B 31.8, Gas Transmission and Distribution piping Systems, 2010 Edition and any edition or addenda published by ASME on or before July 1, 2010.

H. ASME B 31.9, Building Services Piping, 2011 Edition and any edition or addenda published by ASME on or before July 1, 2011.

I. National Board Inspection Code. 2015 Edition and any edition or addenda published on or before July 1, 2015.

J. The following NFPA Codes published on or before July 1, 2013:

(1) NFPA-30, Flammable and Combustible Liquids Code, 2012 Edition;

(2) NFPA-31, Standard for the Installation of Oil Burning Equipment, 2011 Edition;

(3) NFPA-54, National Fuel Gas Code, 2012 Edition;

(4) NFPA-55, Compressed and Gases and Cryogenic Fluids Code, 2013 Edition;

(5) NFPA-58, Liquefied Petroleum Gas Code, 2011 Edition; and

(6) NFPA-85, Boiler and Combustion Systems Hazards Code, 2011 Edition.

K. The following API Codes, published on or before July 1, 2009.

(1) API-510- Pressure Vessel Inspection Code, Ninth Edition and any edition or Addendum published on or before July 1, 2009; and

(2) API-579, Fitness for Service, Second Edition and any Edition or Addendum published on or before July 1, 2009.

L. Any additional codes referenced in the codes that have been adopted.

Disclaimer: These regulations may not be the most recent version. Nebraska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.