Nebraska Administrative Code
Topic - ENVIRONMENT AND ENERGY
Title 195 - CHEMIGATION REGULATIONS
Chapter 3 - EQUIPMENT; STANDARDS, INSTALLATION, MAINTENANCE
Section 195-3-002 - Irrigation pipeline check valve
Current through March 20, 2024
The check valve is to be capable of preventing a mixture of water and chemical from draining or siphoning back into the irrigation water source. It is to be located in the pipeline between the irrigation pump and the point of chemical injection into the irrigation pipeline.
002.01 Existing irrigation distribution systems which, as of July 1, 1987 are equipped with a properly located check valve will be considered in compliance, until repaired or replaced, if the valve provides a watertight seal against reverse flow.
002.02 Irrigation distribution systems which are not equipped with a check valve or contain a check valve which after repair cannot meet the requirement in 002.01, are to be equipped with a check valve as specified in Chapter 3, 008.
002.03 For check valves manufactured or assembled after July 1, 1987, the manufacturer of the valve assembly is to provide verification to the director that the valve model has been tested and certified by an independent laboratory as meeting the criteria specified in Appendix I.
002.04 All check valves installed on an irrigation distribution system after January 1, 1988, are to be models certified to the director as specified in 002.03 above.
