Nebraska Administrative Code
Topic - ENVIRONMENT AND ENERGY
Title 122 - NEBRASKA DEPARTMENT OF ENVIRONMENTAL QUALITY
Chapter 10 - CLASS V INJECTION WELL AUTHORIZATION APPLICATION; INFORMATION REQUIREMENTS
Section 122-10-006

Current through March 20, 2024

Applicants shall provide at a minimum the following information to the Department:

006.01 The specific type of Class V well as defined in Chapter 2 of this Title;

006.02 The operator's name(s), address(es), telephone number(s), ownership status, and status as Federal, State, private, or other entity;

006.03 The owner's name(s), address(es), telephone number(s), ownership status, and status as Federal, State, private, or other entity;

006.04 The county and legal location of the well;

006.05 A detailed description of the fluid that will be injected including laboratory data if available;

006.06 The volume of fluid to be injected in a specific period of time (i.e. gallons/day);

006.07 A description of the nature of the business or activity that generates the waste;

006.08 The status of the well (i.e. planned, under construction, in use, abandoned);

006.09 A scaled map of the entire property on which the injection is proposed including:

006.09A The injection well(s) being authorized,

006.09B Any other injection well(s) located on the property, including but not limited to septic systems and heat pump return flow wells,

006.09C All major structural features on the property including but not limited to buildings, houses, streets, roads, underground sewer and water lines, property lines,

006.09D All water wells located on the property including but not limited to private drinking water wells, irrigation wells and fire wells,

006.10 A scaled map or aerial photograph locating all water wells within a one half (1/2) mile radius of the injection well;

006.11 The design or construction details of the injection well as outlined in Chapter 17 of this Title;

006.12 A confirmation that all siting distances have been met as outlined in Chapter 17 of this Title;

006.13 The static water level or seasonal high water level at the site and the resource from which the data was obtained;

006.14 A description of the geologic material into which the injection is planned;

006.15 The name, telephone number and signature of the person completing the application; and

006.16 The name, address, telephone number, and signature of the owner of the Class V injection well.

Disclaimer: These regulations may not be the most recent version. Nebraska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.