Nebraska Administrative Code
Topic - ENGINEERS AND ARCHITECTS
Title 110 - BOARD OF ENGINEERS AND ARCHITECTS
Chapter 6 - THE LICENSEE SEAL
Section 110-6-2 - Projects Based on Previously Sealed Project Documents

Current through May 7, 2025

6.2.1 Design documents prepared for projects that are designed by architects and professional engineers licensed in jurisdictions other than Nebraska may be used for the construction of the project in Nebraska if reviewed, revised as appropriate, and sealed by an architect or professional engineer licensed in Nebraska under the following circumstances:

6.2.1.1 The original architects and/or professional engineers provide written consent for the adaptation of the documents or, if such permission cannot reasonably be obtained, the architect or professional engineer seeking to adapt the documents provides a written explanation of the circumstances that prevent such permission from being obtained;

6.2.1.2 The documents include appropriate revisions relating to site and local climate considerations;

6.2.1.3 The documents are reviewed for zoning and code compliance, and revised as necessary;

6.2.1.4 The architect or professional engineer in Nebraska accepts full responsibility of the revised documents; and

6.2.1.5 The seal of a coordinating professional is applied, if required.

Disclaimer: These regulations may not be the most recent version. Nebraska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.