Nebraska Administrative Code
Topic - ENGINEERS AND ARCHITECTS
Title 110 - BOARD OF ENGINEERS AND ARCHITECTS
Chapter 6 - THE LICENSEE SEAL
Section 110-6-1 - Use of the Seal
Current through May 7, 2025
6.1.1 Each person licensed as an architect or professional engineer must have a seal that bears the licensee's name, their license number, the words "State of Nebraska," and whether the individual is licensed to practice as a professional engineer, with discipline specified, or an architect.
6.1.2 The purpose of the seal is to assist in identification of the design professional responsible for work performed under the requirements of the E&A Act.
6.1.3 The seal used by an architect or professional engineer shall be legible, whether an embossing, computer generated, or other type of seal. In the absence of legibility, the seal is invalid.
6.1.4 The responsible architect or professional engineer shall identify all work that they have prepared, as well as all work that has been prepared under their direct supervision, by applying their seal to each sheet of original drawings.
6.1.5 All specifications, reports, studies, and other documents prepared as architectural or professional engineering services shall be sealed on the title page and/or the first page, as well as the last page, of the document by the individual architect or professional engineer responsible for the work. Two or more architects or professional engineers may affix their signatures and seals to a sheet provided it is designated by a note under the seal the specific subject matter for which each is responsible.
6.1.6 No seal shall be valid unless signed across the face of the seal with the architect's or professional engineer's name and the date on which the material was signed.
6.1.7 Documents clearly marked as "Draft" prepared for preliminary submission and review do not require the professional's seal, signature, and date, including documents prepared for a client or governmental agency, unless otherwise required by that entity.
6.1.8 Architects and professional engineers are responsible for providing adequate security over their seal and signature wherever it appears, regardless of whether the seal and signature is produced electronically or by other means.
6.1.9 Record and as-built drawings.
These record drawings are a compilation of a copy of the sealed [engineering/architectural] drawings for this project, as modified by addenda, change orders, and information furnished by the contractor or others on the project. The information shown on the record drawings that was provided by the contractor or others not associated with the design [engineer/architect] cannot be verified for accuracy or completeness. The original sealed drawings are on file at the offices of [...].