Administrative Rules of Montana
Department 37 - PUBLIC HEALTH AND HUMAN SERVICES
Chapter 37.14 - RADIATION CONTROL
Subchapter 37.14.13 - Radiation Safety Requirements for Analytical X-Ray Equipment
Rule 37.14.1307 - OPERATING REQUIREMENTS

Universal Citation: MT Admin Rules 37.14.1307

Current through Register Vol. 18, September 20, 2024

(1) Normal operating procedures shall be written and made available to all analytical x-ray equipment workers. No person shall be permitted to operate analytical x-ray equipment in any manner other than that specified in the procedures unless such person has obtained written approval of the radiation safety officer.

(2) No person shall bypass a safety device unless such person has obtained the approval of the radiation safety officer. Such approval, if given, shall be for a specified period of time. When a safety device has been bypassed, a readily discernible sign bearing the words "SAFETY DEVICE NOT WORKING", or words having a similar intent, shall be placed on the radiation source housing.

Sec. 75-3-201 and 75-3-202, MCA; IMP, 75-3-201 and 75-3-202, MCA;

Disclaimer: These regulations may not be the most recent version. Montana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.