Administrative Rules of Montana
Department 24 - LABOR AND INDUSTRY
Chapter 24.301 - BUILDING CODES
Subchapter 24.301.7 - Boiler Safety
Rule 24.301.719 - ASSIGNMENT OF STATE IDENTIFICATION NUMBER
Current through Register Vol. 18, September 20, 2024
(1) At the time of the initial boiler inspection, the state boiler inspector will assign and apply to the boiler a state identification number as directed by the department.
(2) Each steel boiler will be stamped by the inspector, utilizing letters and figures not less than 5/16" in height and arranged as follows: MTB 00000.
(3) Each cast iron boiler will be marked with a permanent marker in two locations and arranged as follows: MTB 00000.
(4) State identification numbers applied to boilers shall be maintained so as to be legible. When a boiler's state identification number becomes indistinct, the department will require the original number to be reapplied.
50-60-203, 50-74-101, MCA; IMP, 50-60-203, 50-74-102, 50-74-206, MCA;
