Administrative Rules of Montana
Department 24 - LABOR AND INDUSTRY
Chapter 24.301 - BUILDING CODES
Subchapter 24.301.12 - Requirements for Recreational Vehicles and Factory-Built Buildings
Rule 24.301.1221 - APPLICATION FOR MODEL PLAN REVIEW
Universal Citation: MT Admin Rules 24.301.1221
Current through Register Vol. 18, September 20, 2024
(1) Any manufacturer of modular buildings or modular building components shall apply to the bureau for plan review of a model or model group before construction.
(2) The application for model plan review shall include the following:
(a) the
applicable plan, quality assurance manual, and system inspection fees required
by ARM 24.301.1261;
(b) the quality
assurance manual as defined in ARM 24.301.1223;
(c) the approved third-party inspection
agency responsible for on-site inspections;
(d) all applicable plan approval items
provided for in chapter 3 of the ICC/MBI 1205 Standard; and
(e) the first page of the construction
document shall include the wind load (Vult), construction type, seismic design
category, and ground snow load.
(3) If the permanent site location of the building is unknown (nonsite-specific), the building must meet the following structural design loads:
(a) Wind load of 115
MPH.
(b) Seismic design category of
D.
(c) Snow load of 30
psf.
AUTH: 50-60-203, 50-60-401, MCA; IMP: 50-60-203, 50-60-401, 50-60-402, MCA
Disclaimer: These regulations may not be the most recent version. Montana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
