Administrative Rules of Montana
Department 24 - LABOR AND INDUSTRY
Chapter 24.183 - BOARD OF PROFESSIONAL ENGINEERS AND PROFESSIONAL LAND SURVEYORS
Subchapter 24.183.4 - General Provisions
Rule 24.183.406 - BRANCH OFFICE

Universal Citation: MT Admin Rules 24.183.406

Current through Register Vol. 6, March 22, 2024

(1) A branch office of an engineering or land surveying firm is defined as an office established to solicit and/or provide engineering or land surveying services.

(a) Each branch office of an engineering firm must have a resident professional engineer in responsible charge.

(b) Each branch office of a surveying firm must have a resident professional land surveyor in responsible charge.

(2) A resident professional engineer is defined as a person holding a valid professional engineering license in Montana and who supervises and is in responsible charge of all engineering work performed in the branch office. The resident professional engineer is not required to be physically located at the branch office.

(3) A resident professional land surveyor is defined as a person holding a valid professional land surveyor license in Montana and who supervises and is in responsible charge of all land surveying work performed in the branch office. The resident professional land surveyor is not required to be physically located at the branch office.

37-1-131, MCA; IMP, 37-67-202, MCA;

Disclaimer: These regulations may not be the most recent version. Montana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.