Administrative Rules of Montana
Department 20 - CORRECTIONS
Chapter 20.27 - PRIVATE CORRECTIONAL FACILITIES
Subchapter 20.27.1 - Siting and Construction Standards
Rule 20.27.106 - DESIGN AND CONSTRUCTION OF PRIVATE CORRECTIONAL FACILITIES

Universal Citation: MT Admin Rules 20.27.106

Current through Register Vol. 18, September 20, 2024

(1) Design and construction of private correctional facilities must conform to applicable American Correctional Association standards for prisons.

(2) Prior to initiating facility construction, design and construction of private correctional facilities must be reviewed and approved by the Montana Department of Administration Architectural and Engineering Division (A&E), and the department.

(3) Prior to commencing operations, the prevailing proposer must obtain letters of approval from A&E and the department.

(4) Design and construction of private correctional facilities must conform to all applicable federal, state, and local codes.

(a) Compliance must be documented by the authority having jurisdiction.

(b) Successful proposers shall provide the department and A&E with copies of all building and occupancy permits.

(5) Any contractor or subcontractor performing construction of any type on private correctional facilities shall perform work in accordance with all state and local laws, rules and ordinances.

53-30-604, MCA; IMP, 53-30-604, 53-30-606, MCA;

Disclaimer: These regulations may not be the most recent version. Montana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.