Missouri Code of State Regulations
Title 20 - DEPARTMENT OF COMMERCE AND INSURANCE
Division 2030 - Missouri Board for Architects, Professional Engineers, Professional Land Surveyors, and Professional Landscape Architects
Chapter 2 - Code of Professional Conduct
Section 20 CSR 2030-2.050 - Title Block

Universal Citation: 20 MO Code of State Regs 2030-2.050

Current through Register Vol. 49, No. 18, September 16, 2024

PURPOSE: This rule clarifies the identity of the client and entity preparing and sealing all architectural, engineering, land surveying, and/or landscape architectural documents.

(1) An architectural, engineering, land surveying, or landscape architectural entity shall incorporate a title block on all drawings, exhibits, plans, plats, maps, and surveys that are required to be signed and sealed by Chapter 327, RSMo, and these regulations.

(2) The title block must, at a minimum, contain the following information:

(A) The name of the licensee either as a sole proprietor, partnership, corporation, limited liability company, or other appropriate entity;

(B) The licensee's address and phone number;

(C) Name or identification of project;

(D) Address/location of project (city/county and state);

(E) Date prepared;

(F) Space for the licensee's signature, date, and seal;

(G) The printed name, discipline, and license number of the person sealing the document; and

(H) The printed name, discipline, and certificate of authority number of the corporation as defined in section 327.011, RSMo.

*Original authority: 327.041, RSMo 1969, amended 1981, 1986, 1989, 1993, 1995, 1999, 2001, 2010 and 327.411, RSMo 1969, amended 1999, 2003, 2010.

Disclaimer: These regulations may not be the most recent version. Missouri may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.