Missouri Code of State Regulations
Title 2 - DEPARTMENT OF AGRICULTURE
Division 90 - Weights, Measures and Consumer Protection
Chapter 60 - Missouri Standards for Property Boundary Surveys
Section 2 CSR 90-60.050 - Use of Missouri Coordinate System of 1983
Universal Citation: 2 MO Code of State Regs 90-60.050
Current through Register Vol. 49, No. 18, September 16, 2024
PURPOSE: This rule sets forth the requirements for referencing land boundary corners to the Missouri Coordinate System of 1983.
(1) When the professional land surveyor is specifically requested or required to reference land boundary corners to the Missouri Coordinate System of 1983, the professional land surveyor shall comply with the following requirements:
(A) The position of the corner shall be based
upon a geodetic control station having a horizontal accuracy of second order
(as defined in
20 CSR
2030-18.020) or higher order;
(B) The survey connecting the corner to the
geodetic control station shall meet the accuracy standards for property
boundary surveys set forth in this chapter; and
(C) The plat or other publication of results
shall identify the geodetic control station(s) that were used to determine the
position of the corner(s), along with a list of the coordinates of those
control station(s); the appropriate adjustment date or realization designation
on the North American Datum of 1983, along with the epoch date when applicable;
a brief statement of the method used to obtain those positions; and the grid
factor used.
Disclaimer: These regulations may not be the most recent version. Missouri may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
