Missouri Code of State Regulations
Title 15 - ELECTED OFFICIALS
Division 30 - Secretary of State
Chapter 10 - Voting Machines (Electronic)
Section 15 CSR 30-10.040 - Electronic Ballot Tabulation - Counting Preparation

Universal Citation: 15 MO Code of State Regs 30-10.040

Current through Register Vol. 49, No. 18, September 16, 2024

PURPOSE: This amendment updates the statutory reference and removes outdated terms.

(1) The election authority shall be responsible for insuring that the electronic tabulating system s/he chooses to use accurately records, and/or counts, all proper votes cast and complies with all applicable state statutes and rules.

(2) The election authority shall be responsible that all steps have been taken to insure that the electronic tabulating equipment operates properly at the time of the pre-election public logic and accuracy test and during the tabulation of ballots on election night.

(3) The election authority shall be responsible for making necessary arrangements for a backup ballot tabulating system.

(4) The election authority shall be responsible for providing a duplicate of the counting program for the computer system on which the ballot tabulation is to be done, regardless of the backup counting system used.

(5) Prior to each election day, the election authority shall be responsible for appointing one (1) or more bipartisan teams composed of equal numbers of members from the two (2) major parties to carry out the functions of-certifying the accuracy of the electronic tabulating equipment, receiving election materials from the polls, duplicating damaged or defective ballots, processing ballots through the electronic tabulating system and preparing election materials for final storage. Each person so appointed shall have the qualifications of and take the oath of office prescribed for election judges in section 115.091, RSMo. These persons will be selected from lists compiled as outlined in section (6) except where an election authority is a board of election commissioners, the election authority may designate persons of its own choosing.

(6) Beginning in 1987, not less than sixty (60) days prior to the first election date of each calendar year, each election authority, except as noted in section (5), shall notify the chairpersons of the two (2) major political parties within their jurisdiction of the number of persons from their parties needed for the bipartisan teams used in processing and counting ballots. Each chairperson shall have thirty (30) days to provide a list to the election authority of twice as many persons meeting the qualifications of section 115.085, RSMo, as the election authority has indicated are necessary. If the chairpersons cannot respond in that thirty- (30-) day period with the list of names or enough persons to fill all positions, the election authority shall select persons from that party to fulfill those functions. Nothing contained in this rule shall prohibit an election authority from requesting a new list of names for the bipartisan teams for each election provided that the lists are requested sixty (60) days prior to the election and that the chairpersons have thirty (30) days for response. If the election authority has not previously utilized automated tabulating equipment, it shall follow the same schedule as will be used in succeeding years except that the chairpersons shall be notified not later than sixty (60) days prior to the August primary.

(7) Prior to election day the election authority shall supervise a public logic and accuracy test of the electronic tabulating equipment conducted by the accuracy certification team.

(A) The logic and accuracy test shall be open to any member of the public; and the election authority, by some appropriate method, shall notify the public of the time and date of the test.

(B) Persons, other than candidates and other individuals required to be notified under section 115.233, RSMo, wishing to participate in the testing process shall file a written request with the election authority at least twenty-four (24) hours prior to the publicized beginning of the logic and accuracy test.

(C) The election authority shall prepare an appropriate logic and accuracy test deck which will include the following conditions:
1. Each ballot position must be tested;

2. No two (2) candidates for the same office may receive the same number of votes, but each candidate must receive one (1) vote;

3. No ballot question may receive the same number of votes for and against;

4. In situations where a voter can legally vote for more than one (1) person for an office, at least one (1) ballot shall be voted for the maximum number of allowable candidates;

5. One (1) ballot shall be marked to have one (1) more vote for each candidate or question than is allowable;

6. One (1) ballot shall have no votes recorded on it;

7. Ballots should be marked to test all name rotations, if used; and

8. One (1) ballot (if possible) shall contain a vote for a candidate for whom persons using that ballot format are not entitled to vote.

(D) The accuracy certification team may run the test deck as provided by the election authority again, making as many additions, subtractions, or changes in the ballots as they desire.

(E) The public logic and accuracy team shall compare the results of the electronic test to those from a manual count of the test ballots. If the results are incorrect, then changes and/or corrections will be made until an errorless count is made. An electronic ballot tabulation machine shall not be used on election day until an errorless count is made on that machine.

(F) After the team is satisfied that the equipment is tabulating the ballots properly, each candidate on the ballot or any representative of a group which has notified the election authority pursuant to subsection (7)(B) may inspect and manually recount the test deck.

(G) If the results match with the manual count, the team shall certify that the system is accurate and properly counting ballots. All logic and accuracy test materials including the deck shall be sealed in a tamperproof container and sealed with a numbered seal. All team members shall verify, by signature or initials, the seal number on a certificate placed on the outside of the container.

(H) The election authority shall have custody of the logic and accuracy test materials including the program until called for by the accuracy certification team.

*Original authority: 115.225, RSMo 1977, amended 1993, 1995.

Disclaimer: These regulations may not be the most recent version. Missouri may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.