Missouri Code of State Regulations
Title 11 - DEPARTMENT OF PUBLIC SAFETY
Division 40 - Division of Fire Safety
Chapter 6 - Amusement Rides
Section 11 CSR 40-6.060 - Director; Qualified Inspectors

Current through Register Vol. 49, No. 18, September 16, 2024

PURPOSE: This rule authorizes the Division of Fire Safety to certify qualified inspectors to conduct the inspection/investigation resulting from an accident.

(1) The director or his/her designee shall certify such qualified inspectors as may be necessary to carry out the Missouri Amusement Ride Safety Act. The inspector shall be considered an independent contractor and not a state employee. The inspector will provide personal references and credentials relating to education and experience to the division. The division will maintain this information on file.

(2) Minimum qualifications of inspector are as follows:

(A) Shall provide to the division a resume detailing inspector's educational/experience history; and

(B) Shall be at least twenty-one (21) years of age; and

(C) Shall possess a high school diploma or equivalent General Education Development (GED); and

(D) Possess a minimum of three (3) years experience in the design, repair, operation or inspection of amusement rides and devices; and

(E) Possess knowledge of the requirements of the American Welding Society pertaining to the welding of parts; and

(F) Possess basic knowledge of requirements of NFPA 70, National Electrical Code, Article 525-Camivals, circuses, fairs, and similar events; and

(G) Possess basic principles of mechanical and structural engineering; and

(H) Shall be familiar with nondestructive testing procedures; and

(I) Possess basic knowledge of the American Society for Testing and Materials (ASTM) requirements for amusement rides and devices; or

(J) Certified by the National Association of Amusement Ride Safety Officials (NAAR-SO) to have and maintain at least a level one certification; or

(K) Shall provide documentation as being a certified amusement ride inspector with the American Industry Manufacturing and Suppliers (AIMS) and meets such qualifications as are established by the Amusement Ride Safety Board.

*Original authority: 316.206, RSMo 1997.

Disclaimer: These regulations may not be the most recent version. Missouri may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.