Missouri Code of State Regulations
Title 11 - DEPARTMENT OF PUBLIC SAFETY
Division 40 - Division of Fire Safety
Chapter 5 - Elevators
Section 11 CSR 40-5.175 - Elevator Contractor
Current through Register Vol. 49, No. 18, September 16, 2024
PURPOSE: This rule describes the scope of work and eligibility requirements to obtain an elevator contractor I or II license.
(1) No sole proprietor, partnership, corporation, limited liability company (LLC), or firm shall erect, construct, alter, replace, test, relocate, maintain, remove, dismantle, or wire any conveyance from the mainline feeder terminals on the controller of any equipment covered by sections 701.350 to 701.383, RSMo, and 11 CSR 40-5.010 to 11 CSR 40-5.150 except those sole proprietors, partnerships, corporations, LLC, or firms who solely install and maintain equipment covered by American National Standard Institute (ANSI) A10.4 and ANSI A90.1 unless they possess a Missouri Elevator Contractor License as described in this rule and either possess a Missouri Elevator Mechanic License or employ licensed elevator mechanics. Use of a licensed contractor is not required for removing or dismantling equipment covered by sections 701.350 to 701.383, RSMo, and 11 CSR 40-5.010 to 11 CSR 40-5.150 which is destroyed as a result of a complete demolition of a secured structure or where the hoist-way or well-way is demolished back to the basic support structure, as long as no access is permitted therein to endanger the safety and welfare of a person. A licensed contractor who performs work on any equipment not currently registered with the department shall report such non-registered equipment to the department as soon as possible, but not to exceed five (5) business days after performing work thereon. Failure to provide notification to the department may result in disciplinary action against the contractor's license. No future work on such equipment shall be performed until such equipment is registered with the department.