Missouri Code of State Regulations
Title 11 - DEPARTMENT OF PUBLIC SAFETY
Division 40 - Division of Fire Safety
Chapter 2 - Boiler and Pressure Vessel Safety Rules
Section 11 CSR 40-2.061 - New Installations
Universal Citation: 11 MO Code of State Regs 40-2.061
Current through Register Vol. 49, No. 18, September 16, 2024
PURPOSE: This rule addresses the safe design, construction, installation, inspection, operation, maintenance, and repair of new boilers, water heaters, and pressure vessels.
(1) As used in this rule, the term "these rules" is intended to mean 11 CSR 40-2.010 through 11 CSR 40-2.065.
(2) Minimum construction standards for new boilers, water heaters, and pressure vessels contracted for after November 12, 1986.
(A) All new boilers, water heaters, and
pressure vessels shall be designed, constructed, inspected, stamped, and
installed in accordance with the American Society of Mechanical Engineers
(ASME) Code and these rules, unless exempted from such construction by the Act.
Boilers, water heaters, and pressure vessels for which an ASME Manufacturers'
Data Report is required shall be registered with the National Board. All
pressure vessels in which steam is generated by the application of heat
resulting from the combustion of fuel (solid, liquid, or gaseous) or electrical
energy for use external to itself shall be classified as a fired steam
boiler.
(B) New boilers, water
heaters, and pressure vessels may be manufactured to internationally recognized
standards with acceptance of the board as outlined in
11 CSR
40-2.064.
*Original authority: 650.215, RSMo 1984, amended 1990, 1993, 1995.
Disclaimer: These regulations may not be the most recent version. Missouri may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
