Missouri Code of State Regulations
Title 10 - DEPARTMENT OF NATURAL RESOURCES
Division 20 - Clean Water Commission
Chapter 6 - Permits
Section 10 CSR 20-6.100 - General Pretreatment Regulation
Current through Register Vol. 49, No. 6, March 15, 2024
PURPOSE: This rule sets forth procedures to prevent the introduction of pollutants into publicly-owned treatment works which will interfere with the operation of publicly-owned treatment works, including interference with its use or disposal of municipal sludge, to prevent the introduction of pollutants into publicly-owned treatment works which will pass through the treatment works or otherwise be incompatible with these works, and to improve opportunities to recycle and reclaim municipal and industrial wastewaters and sludges.
PUBLISHER'S NOTE: The secretary of state has determined that the publication of the entire text of the material which is incorporated by reference as a portion of this rule would be unduly cumbersome or expensive. This material as incorporated by reference in this rule shall be maintained by the agency at its headquarters and shall be made available to the public for inspection and copying at no more than the actual cost of reproduction. This note applies only to the reference material. The entire text of the rule is printed here.
(1) The Environmental Protection Agency federal regulations, 40 CFR Parts 403 through 471, inclusive, that are in effect as of January 1, 2011, herein incorporated by reference, are available by writing to the Office of the Federal Register and the National Archives and Records Administration, Superintendent of Documents, Pittsburgh, PA 15250-7954. This rule does not incorporate any subsequent amendments or additions. The substitution of terms set forth shall apply in this rule in addition to any other modifications set forth in this rule.
(2) Provisions Incorporated.
40 CFR Part 406 Grain Mills Point Source Category
40 CFR Part 413 Electroplating Point Source Category
40 CFR Part 414 Organic Chemicals, Plastics, and Synthetic Fibers
40 CFR Part 415 Inorganic Chemicals Manufacturing Point Source Category
40 CFR Part 417 Soap and Detergent Manufacturing Point Source Category
40 CFR Part 418 Fertilizer Manufacturing Point Source Category
40 CFR Part 419 Petroleum Refining Point Source Category
40 CFR Part 420 Iron and Steel Manufacturing Point Source Category
40 CFR Part 421 Nonferrous Metals Manufacturing Point Source Category
40 CFR Part 423 Steam Electric Power Generating Point Source Category
40 CFR Part 425 Leather Tanning and Finishing Point Source Category
40 CFR Part 426 Glass Manufacturing Point Source Category
40 CFR Part 428 Rubber Manufacturing Point Source Category
40 CFR Part 429 Timber Products Processing Point Source Category
40 CFR Part 430 Pulp, Paper, and Paperboard Point Source Category
40 CFR Part 433 Metal Finishing Point Source Category
40 CFR Part 435 Oil and Gas Extraction Point Source Category
40 CFR Part 437 Centralized Waste Treatment Point Source Category
40 CFR Part 439 Pharmaceutical Manufacturing Point Source Category
40 CFR Part 442 Transportation Equipment Cleaning Point Source Category
40 CFR Part 443 Effluent Limitations Guidelines for Existing Sources and Standards of Performance and Pretreatment Standards for New Sources for the Paving and Roofing Materials (Tars and Asphalt) Point Source Category
40 CFR Part 444 Waste Combustors Point Source Category
40 CFR Part 446 Paint Formulating Point Source Category
40 CFR Part 447 Ink Formulating Point Source Category
40 CFR Part 455 Pesticide Chemicals
40 CFR Part 458 Carbon Black Manufacturing Point Source Category
40 CFR Part 461 Battery Manufacturing Point Source Category
40 CFR Part 464 Metal Molding and Casting Point Source Category
40 CFR Part 465 Coil Coating Point Source Category
40 CFR Part 466 Porcelain Enameling Point Source Category
40 CFR Part 467 Aluminum Forming Point Source Category
40 CFR Part 468 Copper Forming Point Source Category
40 CFR Part 469 Electrical and Electronic Components Point Source Category
40 CFR Part 471 Nonferrous Metals Forming and Metal Powders Point Source Category
Note: 40 CFR Part 412 Concentrated Animal Feeding Operations (CAFO) Point Source Category has been adopted at 10 CSR 20-6.300(4)(C).
(3) Federal statutes and regulations that are cited in 40 CFR Parts 403 through 471 that are not specifically adopted by reference shall be used as guidelines in interpreting the federal regulations in Parts 403 through 471.
(4) The "director" as used in the provisions of the Code of Federal Regulations which are incorporated by reference, means the director of staff of the Missouri Clean Water Commission or that person's delegated representative.
(5) In the provisions of 40 CFR Part 403, following all occurrences of the citation to 40 CFR Part 136, add the phrase "or 10 CSR 20-7.015(9)(A) 2."
(6) In lieu of 40 CFR Section 403.4, the following shall apply:
(7) State Enforcement Actions. In lieu of 40 CFR Section 403.5(e), the following shall apply:
(8) Substitute "Missouri Clean Water Commission" for "Regional Administrator" in 40 CFR Section 403.6(a)(5).
(9) Substitute "Missouri Clean Water Law, Chapter 644, Water Pollution, Powers and Duties of the Commission-rules, procedure. Section 644.026(13), RSMo," for "section 402(b)(1)(C) of the Act" in 40 CFR Section 403.8(e).
(10) Substitute "Missouri Department of Natural Resources" for the term "agency" in the 40 CFR Section 403.16.
(11) Confidentiality.
(12) Pretreatment Authorization. Where the director is also the control authority, the director may issue a pretreatment authorization to a categorical industrial user which discharges industrial process wastewater to a POTW. This authorization will be used to set forth the conditions governing the user's discharge to the POTW, where the POTW does not have an approved pretreatment program or the POTW has not issued discharge permits that meet the requirements set forth in 10 CSR 20-6.100(2) and (3).
(13) Judicial Relief.
*Original authority: 644.041, RSMo 1972, amended 1973.