Mississippi Administrative Code
Title 30 - Professions and Occupations
Part 901 - Rules and Regulations of the Mississippi Board of Licensure for Professional Engineers and Surveyors
Chapter 14 - SEALS
Rule 30-901-14.4 - Prototypical Projects

Universal Citation: MS Code of Rules 30-901-14.4

Current through September 24, 2024

Documents prepared for projects that are designed by other engineers to be built in various locations with few changes, except site adaptation, may be sealed by a Mississippi licensee under the following conditions:

1. Written permission of the original engineer(s) to adapt the documents.

2. Each sheet of plans, drawings, documents, specifications and reports shall be signed, sealed and dated by the engineer who performed the original design and shall also be signed, sealed and dated by the Mississippi licensee who has reviewed the documents in sufficient depth to fully coordinate and assume responsibility.

3. Documentation of all changes made to the original documents.

4. The following written certification shall accompany the seal and signature on each sheet: "I have reviewed this document in sufficient depth to accept full responsibility for its contents and to assure code compliance and coordination.

Miss. Code Ann. § 73-13-15

Disclaimer: These regulations may not be the most recent version. Mississippi may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.