Mississippi Administrative Code
Title 12 - Finance and Administration
Part 3 - Bureau of Building, Grounds and Real Property Management
Chapter 2 - Rules for the Bureau of Building, Grounds and Real Property Management
Rule 12-3-2.1 - Policies and Procedures
Division 12-3-2.1-1 - GENERAL REQUIREMENTS
Section 12-3-2.1-1-01045 - CUTTING AND PATCHING
Section 12-3-2.1-1-01045-1.03 - EXECUTION
Universal Citation: MS Code of Rules 12-3-2.1-1-01045-1.03
Current through September 24, 2024
A. Inspection: Inspect existing conditions of work, including elements subject to movement, or damage during cutting and patching.
B. Preparation Prior to Cutting: Provide shoring, bracing and support, as required, to maintain structural integrity of the building. Provide protection for other portions of work and protection from the elements.
C. Performance:
1. Execute cutting and demolition by methods
which prevent damage to other work and will provide surfaces to receive
installation of repairs and new work.
2. Execute excavating and backfilling by
methods which prevent damage to other work and prevent settlement.
3. Restore work which has been cut or
removed; install new products to provide completed work in accordance with
requirements of Contract Documents.
4. Refinish entire surfaces, as necessary, to
provide an even finish. Refinish continuous surfaces to the nearest
intersection and assemblies entirely.
Disclaimer: These regulations may not be the most recent version. Mississippi may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
