Mississippi Administrative Code
Title 12 - Finance and Administration
Part 3 - Bureau of Building, Grounds and Real Property Management
Chapter 2 - Rules for the Bureau of Building, Grounds and Real Property Management
Rule 12-3-2.1 - Policies and Procedures
Division 12-3-2.1-1 - GENERAL REQUIREMENTS
Section 12-3-2.1-1-01045 - CUTTING AND PATCHING
Section 12-3-2.1-1-01045-1.01 - GENERAL DESCRIPTION
Universal Citation: MS Code of Rules 12-3-2.1-1-01045-1.01
Current through September 24, 2024
A. Scope: To set forth broad, general conditions covering cutting and patching that applies to everyone and everything on the job.
B. Execute cutting including excavating, fitting, or patching of work required to:
1.
Make several parts fit properly.
2.
Uncover work to provide for installation of ill-timed work.
3. Remove and replace defective
work.
4. Remove and replace work
not conforming to Contract requirements.
5. Install specified work in existing
construction.
C. In addition to Contract requirements, upon Professional's written instructions:
1. Uncover work for observation of covered
work.
2. Remove samples of
installed materials for testing.
3.
Remove work to provide alteration of existing work.
D. Do not cut or alter work of another Contractor without permission.
E. Payment of Costs: Costs caused by ill-timed, or defective work, or work not conforming to Contract Documents will be borne by party responsible for ill-timed, defective work, or non-conforming work.
Disclaimer: These regulations may not be the most recent version. Mississippi may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
