Mississippi Administrative Code
Title 11 - Mississippi Department of Environmental Quality
Part 5 - Underground Storage Tank Regulations
Chapter 2 - Mississippi Commission on Environmental Quality Underground Storage Tanks Regulations Technical Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks (UST) (Adopted March 22, 1989; Amended August 25, 2011, Last Amended August 23, 2018)
Appendix 11-5-2-280.4 - GUIDELINES FOR THE PERMANENT CLOSURE OF PETROLEUM UNDERGROUND STORAGE TANK SYSTEMS
Section 11-5-2-280.4-3 - SAMPLING PROCEDURES
Section 11-5-2-280.4-3-3.4 - Groundwater Sample Collection Procedures
Section 11-5-2-280.4-3-3.4.2 - Collecting Groundwater Samples for Diesel, Oil, Etc. (PAH) Analysis

Current through September 24, 2024

For PAH analysis collect one water sample (1 liter) from each sampling point.

1. Sampling containers should be pre-labeled before any sample collection begins.

2. Transfer the sample from the bailer to a one liter widemouth glass sampling container with a Teflon liner. Completely fill container to the top.

3. Immediately store the samples on ice and ship to the laboratory within 24 hours of collection.

BTEX and PAH Sample Handling Requirements for Soil/Groundwater Samples
Parameter Media Container
BTEX (Gasoline) Soil One 4-oz (120-ml) amber glass with Teflon liner
PAH (Diesel, Oil, etc.) Soil One 8-oz (250-ml) amber widemouth glass with Teflon liner
BTEX (Gasoline) Water Three 40-ml amber vials with septum caps
PAH (Diesel, Oil, etc.) Water One 1 liter widemouth glass with Teflon liner

Disclaimer: These regulations may not be the most recent version. Mississippi may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.