Minnesota Administrative Rules
Plumbing Board
4714 - PLUMBING CODE
4714.0210 - TERMS DEFINED BEGINNING WITH H.

Universal Citation: MN Rules 4714.0210
4714.0210 TERMS DEFINED BEGINNING WITH H.
Subpart 1. Amended definition.

UPC section 210.0 is modified by amending the following definition:

Hydromechanical Grease Interceptor - A plumbing appurtenance or appliance that is installed in a sanitary drainage system to intercept nonpetroleum fats, oil, and grease (FOG) from a wastewater discharge and is identified by flow rate, and separation and retention efficiency. The design incorporates air entrainment, hydromechanical separation, interior baffling, or barriers in combination or separately, and one of the following:

A - External flow control, with air intake (vent), directly connected.

B - External flow control, without air intake (vent), directly connected.

C - Without external flow control, directly connected.

These interceptors comply with the requirements of Table 1014.2.1. Hydromechanical grease interceptors are generally installed inside.

Subp. 2. Added definitions.

UPC section 210.0 is modified by adding the following definition:

Health Authority - Means the state health department or local public health agency that has authority established under law to enforce rules governing drinking water supply.

Statutory Authority:

MS s 326B.43; 326B.435

History:

40 SR 71

Published Electronically:

January 25, 2016

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.